fbpx
, , ,

SP11PMDD50

Availability:

30 in stock


SOLID STATE RELAY DC TO DC 50AMPS

635.00 (excluding 18% GST)

30 in stock

Compare

Description

A solid state relay (SSR) allows you to control high-current DC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays.
One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays. Also, because there are no moving contacts, solid state relays can be switched much faster and for much longer periods without wearing out.

Technical Data

SR. DESCRIPTION UNIT Power MOSFET
1 Continuous Drain Current at 20C° with Heatsink Amp 8A | 15A | 25A | 40A | 50A | 100A
2 Safe Continuous Rating Id at 55C° with Heatsink Amp 4A | 10A | 14A | 18A | 25A | 45A
3 Drain to Source Break Down Voltage Vdss (BR) VDC 100VDC | 200VDC | 55VDC
4 Minimum Holding Current mA 20
5 Max. OFF State Leakage Current mA 2
6 Turn ON Delay Time Td-ON mS 2.4
7 Turn OFF Delay Time Td-OFF mS 2.4
8 Isolation Voltage KV 2.5
9 Square Wave Output Hz 100

Product Details

MODEL SP11PMDD50
INPUT VOLTAGE 4-32VDC
INPUT CURRENT 4-16mA
OUTPUT VOLTAGE 5-55VDC
OUTPUT CURRENT AMP AT 20°C 50Amp
OUTPUT CURRENT HEATSINK AT 55°C 25Amp
OUTPUT TYPE OF HEATSINK D-77

Power Mosfet

*Input LED Green Indication
*Output N/O Confurgutions Only
*Input-Output-Body Isolation 2.5kVA
*Reverse polarity Protection on Input side
*Turn ON/OFF Time Min. 2.4 Milli Second
*Across the Load, Back EMF Diode Required for Inductive Load
*Switching Speeds are Inherently Faster
*No need to Derate Power Handing Capacity

Applications

*Solenoid Valve Switching
*PLC Interface
*DC Clutch Break Switching
*DC Motor Switching
*Battery Power Switching
*High Speed DC Switching
*Magnetic Break Switching
*Automobile Vehicle Switching
*DC Motor Forward-Reverse Switching

Precaution

*For Load Current More Than 3Amp External heatsink is Must
*Apply Heatsink Pest on The Base Plate Of The Before Mounting it External Heatsink
*Fast Acting Fuse Require For Protection SSR
*SSR Rating Should Be More or Equal to Maximum Jerk Current Of Load
*Do Not Check SSR Meter Or Continuity tester Otherwise it Will Always Shows OPEN

Note

* Product Images are shown for illustrative purposes only and may differ from actual product

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “SP11PMDD50”

four × five =

There are no reviews yet.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop