30 In stock
₹559.00 (excluding 18% GST)
30 In stock
CompareA solid state relay (SSR) allows you to control high-current DC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays.
One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays. Also, because there are no moving contacts, solid state relays can be switched much faster and for much longer periods without wearing out.
| SR. | DESCRIPTION | UNIT | Power MOSFET |
| 1 | Continuous Drain Current at 20C° with Heatsink | Amp | 8A | 15A | 25A | 40A | 50A | 100A |
| 2 | Safe Continuous Rating Id at 55C° with Heatsink | Amp | 4A | 10A | 14A | 18A | 25A | 45A |
| 3 | Drain to Source Break Down Voltage Vdss (BR) | VDC | 100VDC | 200VDC | 55VDC |
| 4 | Minimum Holding Current | mA | 20 |
| 5 | Max. OFF State Leakage Current | mA | 2 |
| 6 | Turn ON Delay Time Td-ON | mS | 2.4 |
| 7 | Turn OFF Delay Time Td-OFF | mS | 2.4 |
| 8 | Isolation Voltage | KV | 2.5 |
| 9 | Square Wave Output | Hz | 100 |
Input LED Green Indication
Output N/O Confurgutions Only
Input-Output-Body Isolation 2.5kVA
Reverse polarity Protection on Input side
Turn ON/OFF Time Min. 2.4 Milli Second
Switching Speeds are Inherently Faster
No need to Derate Power Handing Capacity
Across the Load, Back EMF Diode Required for Inductive Load
Solenoid Valve Switching
PLC Interface
DC Clutch Break Switching
DC Motor Switching
Battery Power Switching
High Speed DC Switching
Magnetic Break Switching
Automobile Vehicle Switching
DC Motor Forward-Reverse Switching
For Load Current More Than 3Amp External heatsink is Must
Apply Heatsink Pest on The Base Plate Of The Before Mounting it External Heatsink
Fast Acting Fuse Require For Protection SSR
SSR Rating Should Be More or Equal to Maximum Jerk Current Of Load
Do Not Check SSR Meter Or Continuity tester Otherwise it Will Always Shows OPEN
| MODEL | SP11PMDD25 |
| INPUT VOLTAGE | 4-32VDC |
| INPUT CURRENT | 4-16mA |
| OUTPUT VOLTAGE | 5-200VDC |
| OUTPUT CURRENT AMP AT 20°C | 25Amp |
| OUTPUT CURRENT HEATSINK AT 55°C | 14Amp |
| OUTPUT TYPE OF HEATSINK | I-68 |
* Product Images are shown for illustrative purposes only and may differ from actual product
There are no reviews yet.