Description
DRS-480 is a 480W AC/DC DIN rail type security power supply series. In addition to the primary output,
there is an additional charger circuit that will automatically adjust charge current depending on the
primary output current. DRS-480 accepts the universal input between 90VAC and 305VAC, and supports
output 24VDC, 36VDC, and 48VDC nominal systems. With high efficiency up to 93.5%, it can operate
with free air convection cooling under -30C through 70C ambient temperature. In addition to the key
protection features such as overload protection, over voltage protection, battery low voltage disconnect,
and battery reverse polarity protection, the DRS-480 also provides Form-C contacts and LED indicator
alarm signals for AC-fail, battery low, charger fail, and DC-OK to allow easy integration into security
systems that comply with local alarm codes
Features
· Universal input 90~305VAC (277VAC available)
. All-in-one function with Power supply, DC-UPS, battery charger
and status monitoring in ONE compact unit
. Signal and alarms design meet UL2524,NFPA 1221,BS EN/EN54-4
and GB17945 requirement, with adjustable parameters configurable
by communication interface
. Form C relay contacts and LED indicators for AC Fail,
Battery Low, Charger Fail, and DC-OK
. Load-dependent high speed battery charging
. Built-in MODBus protocol, CANBus optional
. Protections: Short circuit / Overload / Over voltage /
Over temperature(auto derating) /
Battery reverse polarity (No damage) / Battery cut off
. Battery low protection / Battery reverse polarity protection
. -30 ~ +70℃ wide operating temperature
. Cooling by free air convection
. Can be installed on DIN rail TS-35/7.5 or 15
. Charging curve can be set with SBP-001
. 20~100% charging current adjustable by VR
. 2 or 3-stage selectable by DIP S.W
. Suitable for lead acid and lithium-ion batteries
. 3 years warranty
Note
Image may be a representation. See specs for product details.
There are no reviews yet.